Anet A6 3D Masaüstü Yazıcı Takımı
Paylaş:

Anet A6 3D Masaüstü Yazıcı Takımı

- SIYAH US FIş 191842601

TF Kartlı Off-line Baskı İşlevli LCD Ekran
Lütfen İngilizce açıklamaya bakın
169.99 $239.76 İndirim Oranı: 29%
  • ÜCRETSİZ KARGO Tahmini Kargolama Tarihi: Dec 12 - Dec 14, Tahmini Teslimat Süresi: iş günü Sipariş İşlem Süresi birkaç gün sürebilir. Depodan gönderildikten sonra, Nakliye (veya Teslimat) Süresi Nakliye Yöntemi'ne bağlıdır.
  • +
  • faizsiz En fazla 0 faizsiz taksidin tadını çıkarın, diğer ürünlerle birlikte sipariş verirken bu tekliften yararlanamayabilirsiniz.
;   
Vergi Bilgisi Fiyat Koruması Fiyat Sorumluluk Reddi Bir Yıllık Onarım Garantisi Ürünü Bildir
Tasviye

Bü ürünleri incelemenizi tavsiye ediyoruz

Bu ürünü alan müşteriler bunları da inceledi

Yasal Uyarı:
● 3D yazıcıyı monte etmeden veya kullanmadan önce lütfen kullanım kılavuzunu dikkatlice okuyunuz.
● 3D yazıcının değiştirilmesi ve özelleştirilmesi kesinlikle yasaktır. Değişikliklerden kaynaklanan sorunlardan hiçbir şekilde sorumlu olmayacağız.
● Bölgeniz için her zaman doğru AC voltajını kullanın.
● Lütfen 3D yazıcıyı yanıcı / yanıcı materyallerin veya herhangi bir ısı kaynağının yanına koymayın.
● 3 boyutlu yazıcıyı sadece uygun havalandırılmış alanlarda kullanın. Yazıcıdan güvenli bir mesafe bırakın.


Anet A6 3D Masaüstü Yazıcı Seti LCD Kontrol Ekranı Ekran Desteği TF Kartı Off-line Baskı

Açıklama:
Anet A6 3D masaüstü yazıcı,akrilik çerçeveli ve tekli ekstrüzyonlu bir 3B yazıcıdır. 220 x 220 x 250 mm hacim, 0.4 mm başlık çapı ile donatılmıştır . Garajla oluşturulan hissi ve el işi cazibelerini korumak için Anet A6 3D masaüstü yazıcı, 3D yazıcı için unutulmaz bir adım adım öğrenme deneyimi kazandıracak bir kittir!

Ana Özellikler:
● Kolay çevrimdışı kullanım için LCD ekran ve tuş takımı ile.
● 0.1 mm baskı kat kalınlığını destekler.
TF kartı çevrimdışı yazdırmayı destekler , özellikle de bilgisayar olmadan kullanışlıdır.
220 x 220 x 250mm imalat hacmi , sizin için tam size göre.
Birden fazla 3B baskı filamentini destekler: ABS / PLA / HIPS.
● Daha basit yapı, hızlı montaj ve kolay ayarlama anlamına gelir; bu da hem zaman hem de enerji tasarrufu sağlar.
● Gelişmiş kararlılık ve güvenilirlik: akrilik plaka daha kararlı baskı sağlar.
● Montaj basit ve DIY müşteriler için uygundur.
● 3D yazıcıda sıfırdan unutulmaz bir adım adım öğrenme deneyimi sağlayan, birleştirilmemiş DIY kiti. Yaratıcılık için bir tutkunuz olduğu sürece, bu ürünü kaçırmamayı göze alamazsınız.
● Anet A6 3D masaüstü yazıcının ambalaj listesini öğrenmek isterseniz, lütfen burayı tıklayın.

Teknik Özellikler

Custom

Marka: Anet

Genel

Marka: Bir ağ
Tipi: Komple Makine
Model: A6
Çerçeve malzemesi: Akrilik plaka
Meme çapı: Tek
Bildirim LED'i: 0.4mm
Meme miktarı: 260 dereceye kadar oda sıcaklığı
Ürün Boyutu: 220 x 220 x 250 mm
Tabaka kalınlığı: 0.1-0.4mm
Hafıza kapasitesi: TF kartı
LCD ekran: Evet
Birincil işlevler: 40 - 120mm / s
Destekleyici materyal: ABS,HIPS,PLA
Malzeme (Objektif): 1.75mm
Dil: Çince,ingilizce,Fransızca,Almanca,İspanyol
Dosya formatı: G-kod,STL
Model Gücü: Evet
XY ekseni konumlandırma doğruluğu: 0.012mm
Z ekseni konumlandırma doğruluğu: 0.004mm
Voltaj: 110V / 220V
Çalışma Gücü: 150W
Ana bilgisayar yazılımı: Cura
Paket listesi: birleştirilmemiş ambalaj
sertifika: CE,FCC,RoHS

Boyutlar ve Ağırlık

Ürün ağırlığı: 10.0000 kg
Paket ağırlığı: 10.5000 kg
Ürün prototipi: 48.00 x 40.00 x 40.00 cm / 18.9 x 15.75 x 15.75 inç
Paket Miktarı: 45.00 x 44.60 x 21.50 cm / 17.72 x 17.56 x 8.46 inç

Ambalaj İçeriği

Ambalaj Kutusu: 1 x Anet A6 3D Masaüstü Yazıcı Seti, 1 x 0,5kg PLA Tedarik

Anet A6 3D Masaüstü Yazıcı Takımı- Black US PlugAnet A6 3D Masaüstü Yazıcı Takımı- Black US Plug

İlginizi çekebilir

Müşteri Yorumları

4.75 5 üzerinden
  • 179
  • 39
  • 7
  • 0
  • 1
Tüm 226 yorumları göster Bir yorum yazın
  • Adrià
    Evet (1) Renk: Black Boyut: US Plug
    Anet A6 review
    ESP: Me llegó en 15 días. El paquete estaba correctamente embalado. Estoy muy contento con la impresora. La calidad de la primera impresión con la configuración recomendada fue muy sorprendente, y se puede mejorar con actualizaciones de piezas impresas y mucha paciencia. La impresora es fácil de montar siguiendo el video de YouTube, y la calidad de las piezas es buena en relación al precio. Escogí la Anet A6 en lugar de la A8 porque es un poco más pequeña y parece ser algo más robusta, también me pareció mejor la rueda de selección en lugar de los botones. Creo que la calidad de impresión de ambas impresoras es bastante similar y lo que realmente importa para conseguir una buena calidad de impresión depende de tu paciencia y habilidad para calibrar la máquina. Si no te importa la estética ni la rueda de selección, te recomendaría la impresora que fuese más económica. ENG: It arrived in 15 days. The order was properly packed. I’m very glad about this 3D printer. The quality of the first print with the recommended settings was very impressive, and it can be improved with some printed updates and a lot of patience. The machine is easy to assemble following the YouTube videos, and the build quality is fine for the price. I chose the Anet A6 instead of the A8 because it’s a little bit smaller and seems to be more robust, also I found that the selector knob it’s more helpful than the buttons. I believe that the print quality on both machines is similar, and what really matters in achieving a great print quality depends on your patience and ability to calibrate the machine. If you don’t care about the esthetic and the selector knob I would recommend the cheapest one.
    Öneri
    ESP: Uno de los acoples del eje Z no está hecho correctamente y esto hace que el tornillo de potencia del eje Z se incline un poco, a pesar de esto no parece afectar mucho a la calidad de impresión, de todas maneras se puede substituir por poco dinero. He leído que mucha gente ha tenido problemas con la fuente de alimentación y que se calienta mucho para impresiones largas, sin embargo, yo no he tenido problemas todavía, imprimiendo por debajo de las 3 horas. ENG: One of the Z couplings is not properly made and it bends a little the Z rod, but it doesn’t seem to affect too much the print quality, nevertheless, it can be replaced for a low price. I have read a lot of people saying that the power supply is weak and gets warm for long print times, however, I haven’t got any problems yet, printing under 3 hours.

    Feb 15,2017 00:36:38

  • RLapinski
    Evet (0) Renk: Black Boyut: EU Plug
    Great product for such low price - especially during Black Friday's sale :)
    I recommend this product for anyone who like to assemble things, took me a while to put it all together. It comes will all tools needed to assemble it (one minus - I've received small Philips screwdriver broken as on photo, but I've got bunch on them at home so no harm done) and package is well packed, it received some damage during transport yet there are no damage to any of printer parts. It comes with 0.5 kg of filament to do some test prints and this is more than other deals offer - that's why I've ordered this product.It is like Ikea furniture, only without printed instruction on how to assemble, yet there are many YT videos how to do it. Official videos mistakes X & Y axis motor, Y is attached to main frame to move hot bed. I also recommend to remove ugly protective film from frame part - looks much more sexy in black but it's little electrostatic and attracts styrofoam parts from packaging.This product test yours engineering skills and it is great project for you and your kids, you can further improve it to have more precise prints. And there is also another GREAT DEAL with this purchase!!! I've received for free: 10 pieces of micro-condoms!!! please see picture. Great deal but they are little too small for me ;-)Pictures does not show frame parts, please check video of assembled product (please note I've removed protective film from frame parts, this is first test print and it is not fully assembled).

    Nov 24,2018 00:02:59

  • Christian Schultheis
    Evet (0) Renk: Black Boyut: EU Plug
    My first 3D Printer - the Anet A6
    The problems that you have with such a device in the beginning, are not just on the device itself lead back. I had to learn everything first. I have tried many different settings. Now I get excellent prints. If you buy an Anet A6 you have to fix one or the other error in the design still. However, this printer has a very large fan base. Improvements can be found on various platforms and also on the Internet search engines. With a little technical understanding and peace, the assembly succeeds relatively quickly. Commissioning was very easy. It's my first 3D printer and I'm really happy with it. The Anet A6 is a very good device to enter this hobby.Die Probleme die man am Anfang mit so einem Gerät hat, sind nicht nur auf das Gerät selbst zurück zu führen. Ich selbst musste erstmal alles lernen. Ich hab viele verschiedene Einstellungen versucht. Jetzt bekomme ich ausgezeichnete Drucke hin. Wenn man einen Anet A6 kauft muss man den ein oder anderen Fehler in der Konstruktion noch beheben. Allerdings hat dieser Drucker eine sehr große Fangemeinde. Verbesserungen findet man auf verschiedenen Plattformen und auch über die Internet-Suchmaschinen. Mit ein wenig technischem Verständnis und Ruhe gelingt der Zusammenbau relativ zügig. Die Inbetriebnahme war sehr einfach. Es ist mein erster 3D Drucker und ich bin wirklich zufrieden damit. Der Anet A6 ist ein sehr gutes Gerät um in dieses Hobby einzusteigen.
    Öneri
    You should plan a silenced box from the beginning. The Anet A6 is not overly loud. However, the noise at long prints can be annoying. Another problem is the already assembled extruder. Here it is no mistake to disassemble this again and tighten all screws again. I had received a large pressure incorrectly because at some point simply no filament was fed. That is very annoying. The slot for the SD card is hard to reach. Here it helps to get an extension. Overall, the A6 but for the price range is a really good entry-level device. I am happy.Man sollte von Anfang an ein einen schallgedämpften Kasten einplanen. Der Anet A6 ist nicht übermäßig laut. Allerdings können die Geräusche bei langen Drucken schon störend sein. Ein weiteres Problem ist der bereits montierte Extruder. Hier ist es kein Fehler diesen nochmal zu zerlegen und alle Schrauben nochmal fest anzuziehen. Ich hatte einen großen Druck fehlerhaft erhalten weil irgendwann einfach kein Filament mehr eingezogen wurde. Das ist dann sehr ärgerlich. Den Slot für die SD-Karte kann man nur schwer erreichen. Hier hilft es sich eine Verlängerung zu besorgen. Insgesamt ist der A6 aber für die Preisklasse ein wirklich gutes Einsteigergerät. Ich bin zufrieden.

    May 02,2018 14:18:33

  • Andrew Walkowiak
    Evet (1) Renk: Black Boyut: US Plug
    The Anet A6 is an amazing value.
    The Anet A6 has exceeded my expectations. Maybe because I found assembling the kit to be as enjoyable as using the printer. It's print quality and reliability has been astounding. Other than normal adjustments like bed leveling, the printer has worked perfectly, and I really expected to have to do more to calibrate the printer. After a few calibration cubes, I printed a rather large model that had high infill and high quality, and it was a marathon print, over 16 hours, and it worked perfectly. For me, this printer is really one where I can go to work, or go to bed and make some very ambitious prints with, and have confidence it will be done correctly while I'm gone. And I do believe the rotary dial encoder makes going through the menus much quicker and easier than the button pad of the A8. And the new arrangement the A6 has for the Z-lifter and X-axis with it's parallel bars vs. the older vertical bars gives you a few extra centimeters of vertical print space. I would recommend this printer to anyone, even an experienced 3D printer user who already has other printers, and would like to add more printing capacity without blowing their budget.
    Öneri
    Very very minor 'cons" so far. A few of the screws were not threaded correctly and they would bind in the nuts, but you get plenty of spares and I didn't come anywhere close to running out. There was an order backlog because the Anet A8 and A6 are so popular, however Gearbest communicated with me, and I was always informed. And as it would turn out, the delay was actually much shorter than expected. My only real "problem" is that my children want me to print so many things, I may have to buy another A6 just so I can print the things I want.

    Mar 14,2017 21:09:23

  • Carl Coetzee
    Evet (0) Renk: Black Boyut: US Plug
    Anet A6 3D Printer review
    The PROS are: 1. Best value for home printer I have found. 2. Easy to build and nice DIY project even though the instruction videos are out of date as some parts are different than in the video. 3.I am a 3d printing noob and have been able to print out my own designed keyholder with logo without any problems other than innitial setup teething problems. Only thing I dislike is that there is no physical on and of switch on the unit but thats another pro for me as thats on my to do list on my next DIY uprade list for the printer. This printer is also smaller and more compact than other more bulkier printers that have the same bed size which is for me a huge plus point. I would recommend any newby 3d print enthusiast to purchase this item.,, I have attached fotos of my upgrades done and printed with the printer with fully assembled picture and a picture of some prints I did and then my review video on youtube.
    Öneri
    The biggest con is the wing nuts used for the heat bed leveling is utter garbage a design flaw.. hence the printing community has made screw caps that work 100% better than the wing nuts... I have cut myself so many times on the side of the heatbed and H-plate that the screws were the 1st print I did after my 1st successful test print.

    Apr 11,2018 19:04:49

  • Andre Laurence
    Evet (1) Renk: Black Boyut: US Plug
    Anet A6 Printer Kit - Excellent Purchase
    Great build quality, Anet videos on YouTube to help with the build, solid construction, excellent community on Facebook, many upgrades available on Thingiverse.com, includes software needed to start printing right away. The shipping was very quick, GearBest has excellent customer service. This is the second purchase I make from GearBest and I am very pleased with them. I was unsure the first time I ordered, but they have surpassed my expectations and offer great service. Great features: - Big LCD with nob for navigation - Heated bed - Parallel X axis bars offering good stability - Nice extruder considering the price of this printer - Large build area at 220mm x 250mm x 220mm (X, Y, Z), bigger than many "name brands" I highly recommend this printer to anyone looking for a first 3D printer as it offers everything needed at a very good price.
    Öneri
    The power supply could be higher amperage output, but the included one does not cause any issues. The "how to" video on YouTube from Anet has a few errors in it: - The H support for the hotbed should be flipped as compared to the video, they have it upside down. - In some of the steps it shows the screw size to be used, but it indicates the incorrect size. It is further along in the video so it is not a big deal and it is simple enough to figure out which screw to use. - The tape on the hotbed offers far to much adhesion. If I had known I would have changed it out for blue painter's tape immediately, but this is a minor thing and not really a reason to not buy the printer.

    Dec 30,2016 09:25:58

  • A.K.
    Evet (1) Renk: Black Boyut: US Plug
    Anet A6
    - Nice appearance, good Quality - Everything you need for 3d printing is included - 20A power supply The assembly takes about 3-6 hours and runs without problems. Ball bearings, round shafts, hotbed everything is just and of good quality. A layer of crepe tape is applied to the hotbed, which has very good adhesion. A 0.5 Kg coil of PLA filament in transparent was also included. On the enclosed 16GB micro SD card are a detailed guide to the setup, problem handling, and calibrating the printer as PDF (in English and Chinese). It also contains a few sample prints as GCODE files that can be printed directly. The power supply is from the year 2017 and seems to be stronger against now. It has 20A and is operated only warm, but not hot. All in all, at the price unbeatable.
    Öneri
    Unfortunately, the really good troubleshooting PDF is translated into English, however, the side issues are no longer correct and there are missing parts of the picture or the text. The included Cura version (14.07) and the associated Ini file is out of date. However, you can download the latest version online. Caution, the newer version has a smaller version number (at the moment (25.04.2016) the version 2.5 is the latest, https://ultimaker.com/en/products/cura-software/list). The existing config file is unfortunately not compatible with the new version and can not be loaded here. You have to adjust everything manually or a corresponding file on the Internet.

    Apr 26,2017 11:44:39

  • Kirill
    Evet (1) Renk: Black Boyut: EU Plug
    Годный
    Отличный принтер за свою цену. Доставка условно курьерская, ехал по ж\\д долго, около месяца в сибирь. Все приехало целое. Акрил очень хрупкий в принтере, не вздумайте закручивать болты с усилием, надо как на детской игрушке слегка и только крест-накрест. Через несколько дней потрескалось крепление моторов оси Z, т.к. перетянул, но не беда, принтер продолжал работать и я напечатал новые. Вообще, он вам нужен для того, чтобы сразу же начать печать новые детали и улучшать качество =) Очень занимательный конструктор и недорого. В комплекте филамент прекрасного качества, вообще не имеет запаха. В принципе, стоит сэкономить косарь-два и заказать здесь, а не на алике у официалов, если есть желание подождать месяц. Качество печати после небольших доработок на 4ку! Вполне реально с нулевым опытом за неделю все собрать и начать печатать вещи приличного качества.
    Öneri
    Бокорезы никакие, лопнули при первом применении. Не факт что принтер оригинал, скорее всего это клон анета, т.к. нет серийных номеров и отличается упаковкой и немного даже по конструкции (например, в оригинале болты крепления стола должны в этот стол вкручиваться, здесь же отверстия уже высверлены), но не критично.

    Mar 15,2018 08:17:14

  • SomeoneFromEurop
    Evet (0) Renk: Black Boyut: EU Plug
    Cheap printer, but perfect for first experience
    A very reasonable price for a 3D printer with actually everything relevant with it. Actually, no further parts are necessary. However, with a few extras that you buy in addition, you can improve the print quality even more.You have to bring a certain technical understanding to optimize details like G-codes or the even more important slicer optimization.The device itself has a pretty good qualtit for this price range. Nevertheless, they are acrylic plates that can easily give way during printing, an aluminium frame would of course be better.The use is different for each user, the more creative you are, the more you can achieve with the printer.All in all a pretty good printer for a reasonable price. Still, the quality can't match an expensive $800 printer.
    Öneri
    Frame yields a little, so waves are created during printing. Not a big problem but a bit ugly.The assembly instructions are not really very accurate, but you can still get help from the InternetLeveling the print bed is annoying every time, but all 3d printers without automation have that in themselves

    Jun 26,2018 16:50:42

  • Artur M.
    Evet (0) Renk: Black Boyut: EU Plug
    Anet A6
    This is my first order with gearbest I am very surprised very quickly with the shipment which arrived at my door in 3 days. I did not expect so fast and I thought I would go about a month from China, however, apparently I was lucky that there is a warehouse for this seller in Poland. installation of the printer itself went without problems using the instructions added on the external memory. there was only a problem with the extruder of his heater, however, Finaly I did run the printer and I already print the whole day without any major problems. The printer itself is well calibrated and our only task is to ensure rigidity of the structure and good leveling of the heating table. I honestly recommend this seller. I hope other buyers will be as happy as I am.

    Nov 17,2018 19:19:29

Müşteri Soru & Cevapları

  • Hepsi
  • Ürün Bilgisi
  • Stok Durumu
  • Ödeme
  • Kargo Hakkında
  • Diğerleri

Soru soran İlk KİŞİ Olun. GB Puanı ister misin? Sadece bir Yorum yaz!

Soru soran İlk KİŞİ Olun. GB Puanı ister misin? Sadece bir Yorum yaz!

Soru soran İlk KİŞİ Olun. GB Puanı ister misin? Sadece bir Yorum yaz!

Soru soran İlk KİŞİ Olun. GB Puanı ister misin? Sadece bir Yorum yaz!

Soru soran İlk KİŞİ Olun. GB Puanı ister misin? Sadece bir Yorum yaz!

Soru soran İlk KİŞİ Olun. GB Puanı ister misin? Sadece bir Yorum yaz!

Bu Ürünle İlgili Sponsorlu Ürünler

Son Görüntülediğiniz Ürünler

Kişiselleştirilmiş tavsiyelere gözatın

Yeni müşteri misiniz? Buradan başlayabilirsiniz >